custom outdoor kitchen

Custom bar we built under a tiki hut has a stainless steel ice bin and speed bar, non-UL rated refrigerator and cubby holes with an access door for storage. We match the texture to the stucco on the house and the granite was chosen to compliment the colors while using low-maintenance materials.

Just goes to show that not all outdoor kitchens have to have a built in bbq grill!

http://www.grill-repair.com

gas log ventless fireplace

This unvented gas fireplace burner and logs has a manual valve, manual ignition, a standing safety pilot kit and an on–off switch that conveniently operated the fireplace without using the valve. There are 2 burners plus the cross-over burner shown in the first image. The cross-over fireplace burner allows the flame to travel between burners so both burners have reliable ignition. We are planning a raffle based on people who visit and comment on our online facebook page. After a month we will take anyone who commented and liked our page and send them the brand new vent-free gas log fireplace kit.

http://www.grill-repair.com/blog

Thank You for shopping with us at Grill-Repair.com.

Jason.
954.2-Grill-2.
888.346.6930.

Happy Birthday Song. Grill-Repair.com

Another satisfied customer with too much time on her hands…  Thank you!

Custom wood burning fireplace designs.

Custom wood burning fireplace designs.

Putting up a fireplace, especially in places with cold weather, is a must. But this is not an easy task to do. Putting up a fireplace is not simply putting up another decoration to a house. By doing so, things like building code, fire codes, preference, style and materials need to be considered accordingly. The design of the fireplace, including the height, position and technical measurements, shall match the lifestyle of the homeowner as well. 

Furthermore, the job does not end after the construction of the fireplace. The work still continues even after its installation. The jobs after construction include annual and regular inspections and other maintenance or preventive or precautionary check-ups.

In order to make the life of the homeowners much easier, there are five (5) points that are worth considering, which are the (1) fireplace installation considerations, (2) type of fireplace, (3) positioning, (4) choosing whether chimney or chase, and (5) choosing whether single or double-walled flue.

On the first topic, installing fireplace require compliance to specific safety guidelines like fire and building codes of a specific city. It is basic to know that one cannot build a fireplace in a combustible area. There are also increments or space allowances surrounding the fireplace area. Depending on the specific codes of the city, the material of the floor surrounding the fireplace shall not be made from easily combustible materials. The foundation, where the fireplace will be built, shall be suitable as well.


Secondly, the type of the fireplace must also be determined accordingly.  Gas fireplaces are growing in popularity and ventless gas fireplace designs have evolved far beyond the boundaries of the fake fire.  Wood burning fireplaces look, smell and sound like a real fireplace and have the ability to burn anything for anytime with no limit to design or heat produced.  There are two major types of a fireplace: namely, masonry and factory-built. The masonry type of a fireplace is usually made up of blocks, fire bricks or mortar. The factory-built, on the other hand, is usually built with lightweight firebox made up of metal.

 

The third topic is primarily about the physical appearance of the fireplace. Its style, design and position must not be substandard. There is a specific location that will match the homeowner’s lifestyle and preference. Furthermore, the fireplace must be placed in accordance with the positioning of the house’s windows, doors and curves or corners. Some cities even provide a standard policy, which states that the fireplace must be built at least 36 inches away from combustible surface like walls or floor.

 
The fourth topic talks about choosing whether to build a chimney or a chase. Chimneys and chases are, of course, different. Choosing which one to build reflects the preference, style and character of the designer and even the homeowner.

To delineate chase from a chimney, the former is usually made up of decorative and pretty covers that enclose the flue inside chimneys. The primarily purpose of using chase is to decorate or stimulate a stylish look of the bricks. Compared to ordinary chimney, the advantage of using chase is the cost. It is much cheaper to use chase because it is usually made up of either metal or wood. This, however, make the chase last not too long, unlike the life-span of a chimney, which is made of concrete bricks. On the other hand, the advantage of the chimney is its durability.


The fifth, which is the last point to consider, is choosing whether to put up a single or a double walled kind of flue. The advantage of the single-walled kind of flue is limited to its safety features when used as insulation in a masonry chimney. Double and triple walled chimney flue allow heat to rise while the flames consuming oxygen at the bottom of the chimney threaten to create a vacuum causing cool air from the top of the chimney termination cap to be pulled down through the outer flue section.  The hot air is pulled up through the inner section and cool air is pulled down through the outer section.  Double and triple walled chimney pipes are law in most states today because they are so much safer within homes built with wood and other combustible materials.

At the end of the design and the construction the enjoyment of sitting back in a cold room with a hot fire is worth every penny spent, every drop of sweat and the hours of creating the custom fireplace.  With a few accessories the wood burning fireplace can become an oven, bed warmer, home deodorizer and just a eye-magnet in the room where everyone wants to congregate.

 

Charbroil BBQ grill and grill parts for barbeque repairs.

Brinkmann barbecue grills and gas grill replacement parts.

Anyone who loves meat has, to some degree or other, a great passion for barbeques, and many consider it a true hobby. Being one of the most simple ways of cooking great meat, and having a distinctive smoky flavor, barbeques are a favorite pastime in the hot summer sundays. It should be no surprise that the popularity of brands like Brinkmann rose exponentially in the last decades and it still grows strong regardless of manufacturing changes, model differences and gas grill replacement parts.

Brinkmann gas bbq grill parts.

The Brinkmann society has its foundation in Dallas, Texas. For over thirty years it has been the preferred choice of many American families because of their basic qualities that made it famous: its easiness to use, the price tag and the versatility.

Not always more is better. Sometimes we just want to spend a Sunday morning cooking meat instead of trying to understand how to do it: most of the barbeque users, in fact, just want a grill to barbeque meat and very little else. Brinkmann barbeques are from this point of view, the epitome of simplicity. No useless features, just a plain barbeque that everyone can start using right away, enjoying the great smell of cooking meat. But simplicity must not be linked to low quality. The Brinkmann society is so proud of their barbeques they guarantees them for over two years. Unfortunately, these barbeques are not as durable as more expensive models but the company warranty will save you from bad surprises. 

Being as simple as it can get, the price is stripped down to bare bones. You cannot find a cheaper deal than Brinkmann barbeques. For example, you can buy a Brinkmann 4-Burner Gas model for just a little less than $200 with plenty of cooking surface space to barbecue. There is a Brinkmann 2-Burner model, that is priced just a little above $100. These most economic models have more difficulties concerning the cooking, and often require constant attention to avoid burning the meat. But it is just a small concerns and the price tag is so low that it can be considered a bargain.

Of course, if you want a more professional feel for your cooking platform, you can check out more expensive models. For example, the Brinkmann Smoke N Pit Smoker, with a $500 price tag, adds even more taste and fullness to your meat, and helps control cooking of the meat. Brinkmann aims to make anyone who wishes to barbeque the perfect experience, from the most demanding customer to the most simple one.

But on one point the Brinkmann Barbeques have a value that makes everyone happy: the particular smoky flavour they give to the meat. Many customers love its taste so much, and say that is very peculiar of this particular kind of barbeques. And everyone who enjoys a good piece of meat cannot deny its wonderful taste when cooked on a Brinkmann Barbeque.